Boss attachments provide top-of-the-range dust suppression systems in Australia.
Boss Attachments dust suppression systems are cost-effective, efficient, and flexible, allowing them to be implemented across demolition and civil projects of all sizes. There's no "one size fits all" solution to suppressing dust.
Approximately 587,000 Australian workers were exposed to silica dust in the workplace in 2011. It has been estimated that 5758 of these will develop a form of lung cancer over the course of their life due to that exposure. (Source: "Understanding Lung Cancer" booklet, Cancer Council 2021. Last medical review of this booklet, October 2021)
MOTOFOG is a nebulized jet dust suppression equipped with an internal combustion engine. With ranges from 10 to 55 m and Diesel and Electric versions, we have the right answer to every need.
The MOTOFOG MFX is an innovative dust suppression system that uses a combination of compressed air and water to keep your work area clean.
The ROTOFOG RFA is equipped with a 360° turning head with an operative height up to approx. 6m and allows to use the existing low pressure water piping.
Dust suppression system trailed C52
Equipped with 52 nozzles for a total of 156 has the possibility to reach considerable heights , water is sprayed in very fine particles covering a large area (about 60 meters)
Dust suppression system C52 basic
Thanks to a powerful fan on which are mounted three concentric layers, each equipped with 52 nozzles for a total of 156 has the possibility to reach considerable heights , water is sprayed in very fine particles covering a large area (about 60 meters)
Dust suppression system C30 on pantography support
Thanks to a powerful fan on which are mounted two concentric layers, each equipped with 32 nozzles for a total of 64 has the possibility to reach considerable heights (15 mt ), water is sprayed in very fine particles covering a large area (about 25 meters)
Dust suppression system C30 basic
Thanks to a powerful fan on which are mounted two concentric layers, each equipped with 32 nozzles for a total of 64 has the possibility to reach considerable heights (5 mt), water is sprayed in very fine particles covering a large area (about 25 meters)
Today, all states and territories in Australia have work health and safety laws that explain the duty of care for employers and workers' responsibilities.
With years of experience in formulating and implementing our dust suppression Australia system, we provide for industries with challenging environments ranging from:
Our team quickly evaluates your project and recommends the best machine(s) for the job.
Here at Boss Attachments, we supply the best range in the world for dust suppression - Motofog. Motofog is a nebulised jet dust suppression system, also known as a 'fog cannon' equipped with an internal combustion or electric engine that powers a high-pressure pump. Complete with nozzle rotation and lift control, both via remote or hand control, the height is controlled not to disturb ongoing work and technicians on-site.
With coverage from 10-55 meters away and up to 35 meters high, you won't find a better solution on the market today
All you require is a water supply, fuel and electricity, and you will be working immediately.
There is no comparison in Motofog water consumption to traditional systems; they are considerably lower.
Most Motofog machines have wheels that help with displacement and can be equipped with a water container
With advanced systems, they use less power than older machines
Designed to save space and have reduced weight
Motofog units come in diesel, petrol and electric power. All are designed to reduce footprint and increase coverage, coupled with low water and fuel consumption.
The flexibility of the rotating heads that can oscillate automatically and are fully adjustable in all directions make them the market leaders for the most extensive demolition and civil projects.
The system quickly and effectively weighs down dust particles by binding them in water droplets (fog) and dropping them to the ground.
For more challenging worksites, if a water supply is limited or, in some cases, non-existent, self-supporting systems are available and most units are suitable for both indoor and outdoor solutions.
On challenging projects, units can be mounted on vehicles or other equipment, making them the most versatile and complete systems available today.
Here at Boss Attachments, we stock the full range of Motofog Dust suppression solutions to suit all applications, big and small.
For further information on what dust suppression systems would suit your project, do not hesitate to contact us now for the best advice at 1300 116 661.
Water-based dust suppression applies atomised water to limit and confine airborne fine particle dissemination. Using a delicate but strong mist, it captures dust particles and brings them down to the surface.
A dust suppression system is essential in all environments that generate dust for the safety of the workers and everyone in the local vicinity.
There are also laws in every Australian State & Territory pertaining to the control of airborne particles, with hefty penalties for any person(s) and/or organisations not complying.
Many businesses have historically used extraction methods such as:
However, these methods and systems are expensive and often don't work effectively. Our dust suppression is a cost-effective and efficient means of controlling the problem.
Of course, this all depends on the application. We need to evaluate the size of the project and understand the work involved.
Contact our friendly team at Boss Attachments to discuss the best options for controlling your dust problem.
Contact Boss Attachments today on 1300 116 661.